5-2-5sn-eli
| Chemistry Requirements | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| N | C | H | Fe | O | Al | Sn | Y | Residuals Each Max | Residuals Max Total | Ti |
| 0.035 | 0.05 | 0.013 | 0.25 | 0.12 | 4.5-5.75 | 2.0-3.0 | 0.01 | 0.1 | 0.4 | Balance |
| Common Name | |
|---|---|
| 5-2.5Sn ELI | 5-2.5Sn ELI |
| A-95AT | |
| UNS | |
| R54521 | |
| General Information | |
| Ti-5Al-2.5Sn ELI alloy’s most common use is for cryogenic applications. It is used for the main booster pumps (liquid oxygen and hydrogen) on the space shuttle. This alpha alloy is available in bar, billet, castings, extrusions, plate, sheet, and wire. | |
| Common Specification | |
| Specification | Product Form |
| AMS 4909 | Strip, Sheet and Plate |
| AMS 4924 | Bar, Ring, and Forgings |
% Maximum unless given as a range.
| Minimum Tensile Properties | |||||
|---|---|---|---|---|---|
| Condition | UTS ksi (Mpa) | >0.2%YS ksi (MPA) | % El. | % RA* | Size |
| Forgings | 100 (689) | 90 (620) | 10 | 25 | <3” |
| Typical Tensile Properties | |||||
|---|---|---|---|---|---|
| Condition | UTS ksi (Mpa) | >0.2%YS ksi (MPA) | % El. | % RA* | Size |
| Bar, Forged | 118 (815 | 103 (710) | 19 | 34 | |
| Casting | 115 (795) | 105 (725) | 10 | 17 | |
Note: Typical properties are not to be utilized as a requirement, but are only listed for guidance. These properties may or may not be attainable in all circumstances.
* %Ra not required by all specifications
Trademark Notice: Some names are trade names and/or trademarks of specific manufacturers. Titan Singapore is not affiliated with any manufacturer(s). Orders will be filled to meet specifications from any available source(s). Names are listed solely for reference to help identify products consistent with listed specifications.