CP GRADE 3
| Common Name | |
|---|---|
| CP Grade 3 | |
| Titanium Grade 3 | |
| UNS | |
| R50550 | |
| General Information | |
| Titanium Alloy Grade 3 is “unalloyed” titanium offering improved strength, moderate ductility, and ASME Code design allowables. The material is readily weldable. This material is very corrosion resistant in highly oxidizing and mildly reducing environments. The material is castable and is often utilized in cast valves and fittings. The alloy is available as castings, wire, welded tube, pipe, plate, sheet, strip, forgings, bar, and billet. | |
| Common Specification | |
| Specification | Product Form |
| AMS 4900 | Sheet, Strip and Plate |
| ASME SB-265 | Sheet, Strip and Plate |
| ASME SB-348 | Bar and Billet |
| ASTM 337 | Seamless and Welded Pipe |
| ASTM B265 (Grade 3) | Strip, Sheet, and Plate |
| ASTM B348 (Grade 3) | Bars and Billets |
| ASTM B367 (Grade 3) | Castings |
| ASTM B381 | Forgings |
| ASTM B861 | Seamless Pipe |
| ASTM B862 | Welded Pipe |
| ASTM F67 (Grade 3) | Unalloyed Titanium for Surgical Implants |
| AWS A5.16 (ERTi-3) | Weld Wire |
| ISO 5832-3 | Unalloyed Titanium for Surgical Implants |
| Specification | Product Form |
| AMS 4900 | Sheet, Strip and Plate |
| ASME SB-265 | Sheet, Strip and Plate |
| ASME SB-348 | Bar and Billet |
| ASTM 337 | Seamless and Welded Pipe |
| ASTM B265 (Grade 3) | Strip, Sheet, and Plate |
| ASTM B348 (Grade 3) | Bars and Billets |
| ASTM B367 (Grade 3) | Castings |
| Chemistry Requirements | |||||||
|---|---|---|---|---|---|---|---|
| N | C | H | Fe | O | Residual Each Max | Residuals Max Total | Ti |
| 0.05 | 0.08 | 0.015 | 0.30 | 0.35 | 0.1 | 0.4 | Balance |
% Maximum unless given as a range.
| Minimum Tensile Properties | ||||
|---|---|---|---|---|
| Condition | UTS ksi (Mpa) | >0.2%YS ksi (MPA) | % El. | % RA* |
| As specified (shape) | 64 (450) | 55 (380) | 18 | 30 |
| Typical Tensile Properties | ||||
|---|---|---|---|---|
| Condition | UTS ksi (Mpa) | >0.2%YS ksi (MPA) | % El. | % RA* |
| As provided | 86 (593) | 67 (462) | 25 | – |
Note: Typical properties are not to be utilized as a requirement, but are only listed for guidance. These properties may or may not be attainable in all circumstances.
* %Ra not required by all specifications
Trademark Notice: Some names are trade names and/or trademarks of specific manufacturers. Titan Singapore is not affiliated with any manufacturer(s). Orders will be filled to meet specifications from any available source(s). Names are listed solely for reference to help identify products consistent with listed specifications.