CP GRADE 7
| Common Name | |
|---|---|
| CP Grade 7 | CP Grade 7 |
| CP Grade 2 with Palladium | CP Grade 2 with Palladium |
| UNS | |
| R52400 | |
| General Information | |
| Titanium Alloy Grade 7 with 0.1% palladium is similar to Grade 2, but with improved resistance to general and localized crevice corrosion in a wide range of reducing acid environments, including chlorides, and where low pH and high temperatures above 180ºF (83ºC) to 500ºF (260ºC) are prevalent. The alloy is available as castings, wire, welded tube, pipe, plate, sheet, strip, forgings, bar, and billet. | |
| Common Specification | |
| Specification | |
| ASME SB-265 | ASME SB-265 |
| Sheet, Strip and Plate | Sheet, Strip and Plate |
| ASTM B265 (Grade 7) | ASTM B265 (Grade 7) |
| ASME SB-348 | ASME SB-348 |
| ASTM B265 (Grade 7) | ASTM B265 (Grade 7) |
| ASTM B348 (Grade 7) | ASTM B348 (Grade 7) |
| ASTM B367 (Grade 7) | ASTM B367 (Grade 7) |
| ASTM B861* | ASTM B861* |
| ASTM B862* | ASTM B862* |
| AWS A5.16 (ERTi-7) | AWS A5.16 (ERTi-7) |
| Chemistry Requirements | ||||||||
|---|---|---|---|---|---|---|---|---|
| N | C | H | Fe | O | Pd | Residual Each Max | Residuals Max Total | Ti |
| 0.05 | 0.08 | 0.015 | 0.30 | 0.25 | 0.12-0.25 | 0.1 | 0.4 | Balance |
% Maximum unless given as a range.
| Minimum Tensile Properties | ||||
|---|---|---|---|---|
| Condition | UTS ksi (Mpa) | >0.2%YS ksi (MPA) | % El. | % RA* |
| As specified (shape) | 50 (345) | 40 (275) | 20 | 30 |
CP GRADE 7-4
| Typical Tensile Properties | ||||
| Condition | UTS ksi (Mpa) | >0.2%YS ksi (MPA) | % El. | % RA* |
| As provided | 70 (483) | 51 (352) | 28 | – |
Note: Typical properties are not to be utilized as a requirement, but are only listed for guidance. These properties may or may not be attainable in all circumstances.
* %Ra not required by all specifications
Trademark Notice: Some names are trade names and/or trademarks of specific manufacturers. Titan Singapore is not affiliated with any manufacturer(s). Orders will be filled to meet specifications from any available source(s). Names are listed solely for reference to help identify products consistent with listed specifications.